SMT LINE EQUIPMENT.CO.LTD
Customer satisfy is the eternal pursue of corporation. Innovation seeks development and cooperation wins the future. The pursuit of excellence,virtue is all over the world.
Add to Cart
|
Machine technology parameters:
| PCB Width Range | Max. 50 - 400mm |
| PCB Transport Height | 750±50mm |
| PCB Transport Speed | 0 - 2000mm／Min |
| PCB Transport Angle (Soldering Tilt Angle) | 3 - 7 degrees |
| PCB Transport Direction | L→R/R→L (Optional) |
| PCB Component Height Limit | Max. 100mm |
| Wave Height Range | Adjustable 0 - 12mm, with wave balance maintained |
| Number of Waves | 2 |
| Preheating Zone Length | 530.3×3=1600mm |
| Number of Preheating Zones | 3 |
| Preheating Zone Power | 5×3=15kw |
| Preheating Zone Temperature | Ambient temperature - 250,℃ adjustable |
| Heating Method | Hot air |
| Applicable Solder Types | Lead - free solder / conventional solder |
| Solder Pot Power | 13.5kw |
| Solder Pot Solder Capacity | Approx. 320kg |
| Solder Pot Temperature | Ambient temperature - 300℃, control accuracy ±1 - 2℃ |
| Temperature Method Control | P.I.D + SSR |
| Machine Control Method | PLC + Computer |
| Flux Capacity | Max 5.2L |
| Flux Flow Rate | 10 - 100ml/min |
| PCB Width Range | Max. 50 - 400mm |
| Power Source | 3 - phase 5 - wire system 380V |
| Total Power | Max.30kw |
| Normal Operating Power | Approx.6kw |
| Air Source | 4 - 7kg/cm² |
| Machine Frame Dimensions | L3200×W1500×H1650mm |
| Overall Dimensions | L3900×W1550×H1750mm |
| Weight | Approx 1500kg |
| Enclosure Section | |
| Machine Structure | Made from industrial square tubes and steel plates. 6 casters at the bottom and 7 adjustable feet for leveling and height adjustment. |
| Front Door Structure | Large - view tempered glass window. Dual hydraulic gas springs for easy opening, ensuring sufficient operation and maintenance space. |
| Rear Door Structure | Sliding and detachable, providing maximum maintenance space. |
| Machine Top | Equipped with LED explosion - proof lighting. |
| Surface Treatment | Entire machine painted in computer white with powder coating. |
| Spraying Section | |
| Nozzle | ST - 8 nozzles. Spray range: 20 - 65mm (adjustable). Height: 50 - 80mm (adjustable). Max. flow rate: 60ml／min. |
| Pneumatic System | High - quality filters, Yu Dek control valves and fittings. Digital air pressure display. Acid - and alkali - resistant and corrosion - proof air pipes. |
| Nozzle Movement System | Stepper motor + PLC control. Limit switches and board - entry photoeyes for automatic PCB speed and length detection. Inductive spraying. |
| Flux Recovery System | Stainless steel tray under nozzles for wastewater and flux collection, easy to pull - out and clean. |
| Flux Addition System | Manual/Auto. |
| Exhaust Filtration System | Exhaust box with stainless steel filter mesh in the spray box. Uses fluid properties to adsorb and exhaust excess flux. |
| Spray Box Structure | Stainless steel, easy to clean and maintain. High corrosion resistance. |
| Preheating Section | |
| Preheating Zone | 1600mm / 3 - zone independent temperature control. Uniform PCB heating. |
| Temp. Control Method | Accurate and reliable PID control. Imported thermocouple system with abnormal thermocouple alarm. |
| Heating Elements | Taiwan heating elements. Fast heating, long life, low thermal inertia, uniform temperature distribution. |
| Preheating Power | Total power: 15kW. |
| Installation Mode | Fully enclosed preheating system for maximum energy saving. |
| Preheating Box Cover | Streamlined design. Filled with imported high - density rock wool from Xiser for excellent insulation. |
The liquid level in the tin bath is too low and needs to be replenished with solder.
If the nozzle is clogged or the pump speed is abnormal, it is necessary to clean it or check the drive motor.
There are too many impurities in the solder. It is recommended to filter or replace the tin.
Clean the oxide and residual solder slag in the tin bath every day.
Check if the nozzle is clogged and whether the flatness of the wave peak is normal.
Lubricate the guide rails and transmission components every week.
Calibrate the temperature sensor and transmission speed monthly.
Enter the "Temperature Setting" menu through the control panel and set the temperature of the solder bath according to the type of solder (such as lead-free solder wire) (recommended range: 260 - 280°C).
The temperature of the preheating zone should be set in stages according to the PCB material and the temperature resistance of the components (usually 120-180°C).
Why Choose CNSMT For your SMT Needs?
These are the reasons why many SMT factories around the world trusts CNSMT. We are not just after sales; we are after a long-term business relationship.
Company Information
CNSMT is the leading manufacturer and supplieir for SMT machines and Solution with over 10 years' experience in China. And we can also do OEM&ODM for SMT traders, we have vast of sources in SMT field,even you need used or new SMT equipments or other parts, we can help you get the best quality and competitive cost machines.
What we can do for you:
※ We have our own factory make SMT equipments and devices
※ We have a professional technich engineer team for produce machines
※ We can customize variety of SMT machines for you according your requirements
※ We buy and sell used and new SMT equipments all over the world
※ We provide you SMT full line machines and export to worldwide
※ Becoming the most reliable Chinese partner for you.
Our Service
1,SMT full line solution
2,SMT Peripheral equipments manufacturer
3,SMT feeder, smt nozzle, smt feeder calibration, PCB trolley, feeder trolley, PCB strorage, SMT squeegee manufacturer
4,Buy and sell used and new YAMAHA JUKI FUJI PANASONIC SAMSUNG and reflow oven printers